FixVault
Home › Saturn › 2010 › Sky Base, Automatic › Repair and Diagnosis › Engine Mechanical › Fuel System › Engine Controls And Fuel - 2.4L - Repair Instructions › Repair Instructions › Accelerator Pedal with Position Sensor Assembly Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating APP Sensor
    GM1593853Courtesy of GENERAL MOTORS CORP.
  1. Install the APP sensor to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the APP sensor nuts and tighten to 10 N.m (89 lb in).
    3. Fig 2: View Of APP Sensor Electrical Connector
    GM1593852Courtesy of GENERAL MOTORS CORP.
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
  5. Verify the operation of the accelerator pedal.
  6. Install the knee bolster. Refer to Knee Bolster Replacement (SKY) or Knee Bolster Replacement (Solstice) .
About FixVault