FixVault
Home › Saturn › 2010 › Sky Red Line, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.0L - Repair Instructions › Repair Instructions › Camshaft Position Sensor Replacement - Exhaust › Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Wiring Harness Electrical Connector & ECT Sensor
    GM1826284Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector (4) from the exhaust camshaft position (CMP) sensor.
    2. Fig 2: Identifying CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor bolt. (Intake CMP shown, exhaust CMP similar)
  3. Remove the CMP sensor.
About FixVault