FixVault
Home › Saturn › 2010 › Sky Red Line, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 2.0L - Repair Instructions › Repair Instructions › Charge Air Bypass Valve Solenoid Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Charge Air Bypass Solenoid
    GM1829748Courtesy of GENERAL MOTORS CORP.
  1. Position the charge air bypass solenoid to the engine.
    2. Fig 2: Identifying Charge Air Bypass Valve Solenoid Tube
    GM1750413Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the charge air bypass solenoid bolts (2) and tighten to 10 N.m (89 lb in).
  3. Install the charge air bypass solenoid vacuum hose to the intake manifold and position the clamp (1).
  4. Install the charge air bypass solenoid vacuum hose to the charge air cooler outlet pipe and position the clamp (3).
  5. Install the charge air bypass solenoid vacuum hose to the turbocharger coolant feed hose clamps (4).
  6. Install the charge air bypass solenoid vacuum to from the turbocharger and install the clamp (5).
  7. Connect the engine wiring harness electrical connector to the charge air bypass solenoid.
About FixVault