Operation Procedure
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
- Touch "CAN DIAG SUPPORT MNTR" on the "DATA MONITOR" screen.
- Touch "START".
- Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
ITEM NAME
| Item name | Display |
| CAN CIRC 1 | OK/UNKWN |
| CAN CIRC 2 | OK/UNKWN |
| CAN CIRC 3 | OK/UNKWN |
| CAN 1 STAT | 0-40 |
| CAN 2 STAT | 0-40 |
| CAN 3 STAT | 0-40 |
NOTE:
The details for the display, of the CAN status are as follows:
- 0: Normal
- 1-40: Error detected in the past and stored in IPDM E/R memory.