Inspection Procedure

POWER WINDOW REGULATOR MOTOR ASSEMBLY (LH AND RH)
1. Reset the power window regulator motor (see INITIALIZATION ).
2. Check if the power window AUTO UP/DOWN function operates normally.
  OK: AUTO UP/DOWN function operates normally.
NG : OTHER PROBLEM

OK: Go To Next Step
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check that the jam protection function operates normally (see ON-VEHICLE INSPECTION ).
  HINT:
  
  The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
NG : REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (LH AND RH)

OK : END