Radar Sensor Check Procedure

ARM the system.
Press the LOCK button on the remote control or lock the doors with the key.

(Remember, the system will not ARM if any door is open.)

Fig 1: Identifying LOCK Button
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Wait until the STATUS Monitor's LED starts flashing.
The LED will flash 30 seconds after the last door or hatch is closed.

Fig 2: Identifying STATUS Monitor's LED
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Move inside the vehicle.
When movement occurs inside the vehicle, an alarm will be triggered immediately. If sensor detects 2nd movement within 60 seconds after the 1st warn away alarm trigger, then a regular ALARM activates for 60 seconds.

NOTE: If you find that the system does not perform as expected, contact your Toyota dealer for more information.

Fig 3: Moving Inside Vehicle
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISARM the system to stop the ALARM.
Press the UNLOCK button on the remote control or use the key to DISARM the system.

Fig 4: Identifying UNLOCK Button
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002