FixVault
Home › Scion › 2006 › xB Automatic › Repair and Diagnosis › Body & Frame › Windows › Windshield/Window Glass › Power Relay › On-Vehicle Inspection

On-Vehicle Inspection

  1. REMOVE POWER RELAY (Marking: POWER) 
    1. Remove the power relay from the instrument panel junction block.
  2. INSPECT POWER RELAY 
    1. Measure the resistance of the relay.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Specified Condition
      3 - 5 10 kΩ or higher
      3 - 5 Below 1 Ω (When battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

  3. INSTALL POWER RELAY 
    Fig 1: Inspecting Power Relay
    G04229456Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault