Front Axle Hub Bolt: Replacement

REMOVE FRONT WHEEL
DISCONNECT FRONT DISC BRAKE CYLINDER ASSEMBLY
1. Disconnect the front disc brake cylinder assembly (see REMOVAL ).
REMOVE FRONT DISC
REMOVE FRONT AXLE HUB BOLT
1. Using SST and a screwdriver or an equivalent to hold the axle hub, remove the hub bolt.
  SST 09628-10011
  
  Fig 1: Removing Front Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB BOLT
1. Install the washer and nut to a new hub bolt as shown in the illustration.
2. Using a screwdriver or an equivalent to hold the axle hub, install the hub bolt by tightening the nut.
INSTALL FRONT DISC
CONNECT FRONT DISC BRAKE CYLINDER ASSEMBLY
1. Connect the front disc brake cylinder assembly (see INSPECTION ).
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)

Fig 2: Installing Front Axle Hub Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002