FixVault
Home › Scion › 2006 › xB Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (1NZ-FE) › Crankshaft Position Sensor › Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.
      Fig 1: Installing Sensor With Bolt
      G04225733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

    2. Connect the sensor connector.
  2. INSTALL ENGINE UNDER COVER RH 
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
About FixVault