FixVault
Home › Scion › 2007 › tC Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Switch › Inspection

Door Control Switch: Inspection

  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH (w/ Jam Protection Function) 
    1. Inspect door control switch.
      1. Measure the resistance of the door control switch.

        Standard resistance 

        POWER WINDOW REGULATOR MASTER SWITCH STANDARD RESISTANCE SPECIFICATIONS (W/ JAM PROTECTION FUNCTION)

        Tester Connection Switch Condition Specified Condition
        2 - 4 Lock Below 1 Ω
        2 - 4 OFF (Free) 10 kΩ or higher
        2 - 14 Unlock Below 1 Ω
        2 - 14 OFF (Free) 10 kΩ or higher
        Fig 1: Identifying Terminals Of Power Window Regulator Master Switch Connector
        G04867145Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH (w/o Jam Protection Function) 
    1. Inspect door control switch.
      1. Measure the resistance of the door control switch.

        Standard resistance 

        POWER WINDOW REGULATOR MASTER SWITCH STANDARD RESISTANCE SPECIFICATIONS (W/O JAM PROTECTION FUNCTION)

        Tester Connection Switch Condition Specified Condition
        1 - 2 Lock Below 1 Ω
        1 - 2 OFF (Free) 10 kΩ or higher
        1 - 7 Unlock Below 1 Ω
        1 - 7 OFF (Free) 10 kΩ or higher
        Fig 2: Identifying Terminals Of Power Window Regulator Master Switch Connector
        G04867146Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT DOOR CONTROL SWITCH (w/ Jam Protection Function) 
    1. Inspect door control switch.
      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance 

        DOOR CONTROL SWITCH STANDARD RESISTANCE SPECIFICATIONS (W/ JAM PROTECTION FUNCTION)

        Tester Connection Switch Condition Specified Condition
        2 - 3 Lock Below 1 Ω
        1 - 2 Unlock Below 1 Ω
        Fig 3: Identifying Terminals Of Door Control Switch Connector
        G04867148Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT DOOR CONTROL SWITCH (w/o Jam Protection Function) 
    1. Inspect door control switch.
      1. Measure the resistance according to the value(s) in the table below.

        Standard resistance 

        DOOR CONTROL SWITCH STANDARD RESISTANCE SPECIFICATIONS (W/O JAM PROTECTION FUNCTION)

        Tester Connection Switch Condition Specified Condition
        3 - 6 Lock Below 1 Ω
        3 - 5 Unlock Below 1 Ω
        Fig 4: Identifying Terminals Of Door Control Switch Connector
        G04867149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault