How To Proceed With Troubleshooting

HINT:

Use this procedure to troubleshoot the power door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding.

3. PROBLEM SYMPTOMS TABLE 

   Result 

   PROBLEM SYMPTOMS RESULT CHART
   
   

   Result	Proceed to
   Fault is not listed In problem symptoms table.	A
   Fault is listed in problem symptoms table.	B

   B: Go to step 4 

   A: GO TO NEXT STEP 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. Terminal of ECU (See TERMINALS OF ECU  )
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

   END