Front Speed Sensor: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL FRONT SPEED SENSOR LH 
   1. Install the speed sensor with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE: Keep the sensor tip and sensor installation hole free from foreign matter.
      Fig 1: Identifying Speed Sensor Bolt

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the speed sensor to the body with the 2 bolts.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) for bolt A 

      29 N*m (296 kgf*cm, 21 ft.*lbf) for bolt B 

      Fig 2: Identifying Speed Sensor Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Connect the connector and attach the clamp.
   Fig 3: Identifying Front Speed Sensor LH Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT FENDER LINER LH  (See INSTALLATION )
3. INSTALL FRONT WHEEL 

   Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
   NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
5. CHECK ABS SPEED SENSOR SIGNAL 
   1. Check the ABS speed sensor signal (see DIAGNOSIS SYSTEM  ).