Data List / Active Test
- DATA LIST
- While the intelligent tester is connected to the DLC3 with the ignition switch in the ON position, the cruise control DATA LIST can be displayed. Follow the prompts on the tester screen to access the DATA LIST.
ECM (Cruise Control):
DATA LIST - ECM (CRUISE CONTROL)Tester Display Measurement Item/Range Normal Condition Diagnostic Note VEHICLE SPD Vehicle speed / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed - MEMORY SPD Cruise control memorized speed / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual stored vehicle speed - THROTTLE Required throttle opening angle / min.: 0°, max.: 125° Actual required throttle opening angle - CRUISE CONTROL Cruise control system active condition / ON or OFF ON: Cruise control activated
OFF: Cruise control inactivated- MAIN SW (MAIN) Main switch signal (Main CPU) / ON or OFF ON: Main switch ON (Pushed on)
OFF: Main switch OFF (Pushed off)- CCS READY M Cruise control system standby condition (Main CPU)/ ON or OFF ON - OFF: ON/OFF changes each time main switch is pushed in. - CCS INDICATOR M Cruise indicator signal (Main CPU)/ ON or OFF ON: "CRUISE" ON
OFF: "CRUISE" OFF- CANCEL SW CANCEL switch signal / ON or OFF ON: CANCEL switch ON
OFF: CANCEL switch OFF- SET/COAST SW SET / - switch signal ON or OFF ON: SET / - switch ON
OFF: SET/-switch OFF- RES/ACC SW RES / + switch signal ON or OFF ON: RES / + switch ON
OFF: RES / + switch OFF- STP LIGHT SW M Stop light switch signal (Main CPU)/ ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released- CCS OPER STATUS PNP switch signal (D position) / ON or OFF ON: Shift position D
OFF: Any shift position except DFor automatic transaxle
- While the intelligent tester is connected to the DLC3 with the ignition switch in the ON position, the cruise control DATA LIST can be displayed. Follow the prompts on the tester screen to access the DATA LIST.