Floor Shift Assembly: Disassembly

REMOVE SHIFT LOCK RELEASE BUTTON COVER
1. Using a screwdriver, remove the cover from the position indicator housing.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Identifying Cover From Position Indicator Housing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
DISCONNECT INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Disconnect the wire connector from the floor shift.
  
  Fig 2: Identifying Wire Connector From Floor Shift
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
1. Using a screwdriver, remove the housing from the shift lock control unit.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 3: Identifying Housing From Shift Lock Control Unit
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR LIGHT GUIDE
1. Using a screwdriver, remove the guide from the floor shift position indicator housing sub-assembly.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 4: Identifying Guide From Floor Shift Position Indicator Housing Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Remove the wire from the position indicator light guide.
  
  Fig 5: Identifying Wire From Position Indicator Light Guide
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bulb from the wire.
3. Remove the cap from the bulb.
  
  Fig 6: Identifying Cap From Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the cover from the shift lock control unit.
  
  Fig 7: Identifying Cover From Shift Lock Control Unit
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the cover from the position indicator slide cover.
  
  Fig 8: Identifying Cover From Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON
1. Remove the button and spring from the shift lock control unit.
  
  Fig 9: Identifying Button And Spring From Shift Lock Control Unit
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR HOUSING LOWER
1. Remove the housing from the shift lock control unit.
  
  Fig 10: Identifying Housing From Shift Lock Control Unit
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
1. Remove the shift lever nut and lock pin from the shift lock control unit.
2. Remove the shift lever guide housing from the shift lock control unit.
  NOTE: First remove the shift lever nut and lock pin.
  Then disengage the 2 claws.
  
  Fig 11: Identifying Shift Lock Control ECU Subassembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and ECU.
Fig 12: Identifying Screws And ECU
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002