On-Vehicle Inspection

INSPECT ACCELERATOR PEDAL ASSEMBLY

Connect an intelligent tester to the DLC3.
Turn the ignition switch ON.
Turn the intelligent tester main switch on.
Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DATA LIST / ACCEL POS #1, ACCEL POS #2.
2. Techstream - Select: Powertrain / Engine and ECT / Data List / ACCEL POS #1, ACCEL POS #2

Read the value displayed on the tester.

ACCEL POS #1 Standard Voltage

ACCEL POS #1 STANDARD VOLTAGE

Condition	Specified Condition
Accelerator pedal is released	0.5 to 1.1 V
Accelerator pedal is depressed	2.6 to 4.5 V

ACCEL POS #2 Standard Voltage

ACCEL POS #2 STANDARD VOLTAGE

Condition	Specified Condition
Accelerator pedal is released	1.2 to 2.0 V
Accelerator pedal is depressed	3.4 to 5.0 V

If the result is not as specified, check the accelerator pedal assembly, wire harness or ECM.