Throttle Body: Removal
- DRAIN ENGINE COOLANT
(See REPLACEMENT
)
- REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
- Remove the 2 nuts and engine cover.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE
- Disconnect the mass air flow meter connector.
- Separate the wire harness.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Separate the No. 1 vacuum switching valve.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the ventilation hose.
- Separate the No. 2 fuel vapor feed hose.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Loosen the No. 1 air cleaner hose clamp, unlock the air cleaner assembly clamp and remove the air cleaner cap sub-assembly with No. 1 air cleaner hose.
- Remove the air cleaner filter element.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE THROTTLE BODY ASSEMBLY
- Disconnect the No. 2 fuel vapor feed hose.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the No. 1 water by-pass hose.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the No. 2 water by-pass hose.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the connector.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Disconnect the throttle hose.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 4 bolts, and then remove the fuel pipe support and throttle body assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the gasket from the intake manifold.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002