Deceleration Sensor: Installation

INSTALL DECELERATION SENSOR
1. Install the deceleration sensor with the 2 bolts.
  Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
  
  Fig 1: Locating Deceleration Sensor Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the deceleration sensor connector.
INSTALL DECELERATION SENSOR PROTECTOR
1. Install the deceleration sensor protector with the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 2: Locating Deceleration Sensor Protector Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR CONSOLE BOX COVER (See INSTALLATION )
CHECK ABS SENSOR SIGNAL
(See TEST MODE PROCEDURE )