FixVault
Home › Scion › 2008 › xD Standard › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt › Seat Belt Warning System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using a Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    NOTE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Turn the ignition switch off.
    2. Connect a Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the tester on.
    5. Enter the following menus: Body Electrical / (desired system) / Data List /
    6. According to the display on tester, read the "Data List".

      Combination Meter 

      DATA LIST - COMBINATION METER

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D-Seatbelt Warning Buzzer Driver seat belt warning buzzer ON or OFF ON Driver seat belt warning buzzer ON setting
      OFF Driver seat belt warning buzzer OFF setting      		 -
      P-Seatbelt Warning Buzzer Front passenger seat belt warning buzzer ON or OFF ON Front passenger seat belt warning buzzer ON setting
      OFF Front passenger seat belt warning buzzer OFF setting      		 -

      SRS Airbag 

      DATA LIST - SRS AIRBAG

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Passenger Classification Passenger classification
      NG Data is not determined
      OFF Vacant
      Child Child (less than 36 kg (79 37 lb)) is seated
      AF05 Adult (36 to 54 kg (79 37 to 119 05 lb) is seated
      AM50 Adult (more than 54 kg (119 05 lb)) is seated
      Fail A failure is detected      		 OFF, Child, AF05 or AM50 -
      Driver Buckle SW Driver seat belt buckle switch Unset Driver seat belt is unfastened
      Set Driver seat belt is fastened
      NG Data is not determined      		 Unset or Set -
      Passenger Buckle SW Front passenger seat belt buckle switch Unset Front passenger seat belt is unfastened
      Set Front passenger seat belt is fastened
      NG Data is not determined      		 Unset or Set -

      Occupant Detection 

      DATA LIST - OCCUPANT DETECTION

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Passenger Classification Passenger classification
      NG Data is not determined
      OFF Vacant
      Child Child (less than 36 kg (79 37 lb)) is seated
      AF05 Adult (36 to 54 kg (79 37 to 119 05 lb) is seated
      AM50 Adult (more than 54 kg (119 05 lb)) is seated
      Fail A failure is detected      		 OFF, Child, AF05 or AM50 -
      Passenger Buckle SW Front passenger seat belt buckle switch
      Unset Front passenger seat belt is unfastened
      Set Front passenger seat belt is fastened
      NG Data is not determined      		 Unset or Set -
  2. PERFORM ACTIVE TEST 

    HINT:

    Using a Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

    1. Turn the ignition switch off.
    2. Connect a Techstream to the DLC3.
    3. Turn the ignition switch to ON.
    4. Turn the tester on.
    5. Enter the following menus: Body Electrical / Combination Meter / Active Test /
    6. According to the display on tester, perform the "Active Test".

      Combination Meter 

      ACTIVE TEST - COMBINATION METER

      Tester Display Test Part Control Range Diagnostic Note
      Indicat Lamp P-seat Belt Front passenger seat belt warning light ON or OFF Confirm that the vehicle is stopped with the engine idling
      Indicat Lamp D-seat Belt Driver seat belt warning light ON or OFF Confirm that the vehicle is stopped with the engine idling
About FixVault