Outer Rear View Mirror: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH 
   1. Install the mirror with the 3 nuts.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   2. Connect the connector.
   Fig 1: Identifying Outer Rear View Mirror Assembly Nuts
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
3. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.