Inspection Procedure

POWER WINDOW REGULATOR MOTOR ASSEMBLY (LH AND RH)
1. Reset the power window regulator motor (See INITIALIZATION ).
2. Check if the power window AUTO UP/DOWN function operates normally.
  OK:
  
  AUTO UP/DOWN function operates normally.
NG: OTHER PROBLEM

OK: Go to next step
CHECK JAM PROTECTION FUNCTION OPERATING RANGE
1. Check that the jam protection function operates normally (See ON-VEHICLE INSPECTION ).
  HINT:
  
  The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
NG: REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (LH AND RH)

OK: END