Rear Lower Control Arm: Installation

1. Install the lower control arm to the rear suspension member, and temporarily tighten the bolt.
   Fig 1: Locating Lower Control Arm Assembly Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the nut.

   Torque: 105 N*m (1,050 kgf*cm, 77 ft.*lbf) 

3. Install the clip.
   NOTE:

   • When the holes for the clip are not aligned, adjust them by tightening the nut. The tightening angle for the adjustment must be less than 60°.
   • Insert the clip from the rear side of the vehicle.
     Fig 2: Locating Clip And Nut

     Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

1. Fully tighten the bolt.

   Torque: 115 N*m (1,170 kgf*cm, 85 ft.*lbf) 

Fig 3: Locating Lower Control Arm Assembly Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Inspect and adjust the rear wheel alignment (see ADJUSTMENT  ).