Damper Servo Motor (Air Inlet) Control

When the FRESH/RECIRC select SW is set to RECIRC, the motor in the damper servo motor (Air inlet) starts rotating and moves the damper toward the RECIRC side. Since the damper position is detected by TERMINAL REC of the A/C control assembly, the motor continues to rotate until the damper reaches its stop position. When the FRESH/RECIRC select SW is set to FRESH, the motor in the air inlet control servo motor starts rotating to move the damper toward the FRESH side. Since the damper position is detected by TERMINAL FRS of the A/C control assembly, the motor continues to rotate until the damper reaches its stop position.