Shift Lever Assembly: Installation

1. Install the shift lever with the 4 bolts.

Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf) 

Fig 1: Identifying Shift Lever With Bolts

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Connect the ends of the control cable and install the 2 clips to the shift lever.
   Fig 2: Identifying Ends Of Control Cable

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the lock nuts of the shift cable 270° counterclockwise, and hold them in that position.
3. Install the shift cable and select cable while holding the lock nuts.
4. Check that the cables are installed securely.
   Fig 3: Identifying Lock Nuts Of Shift Cable

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Push in the cable locks of the shift cable and select cable.
   Fig 4: Identifying Cable Locks Of Shift Cable And Select Cable

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002