FixVault
Home › Scion › 2009 › xB Automatic › Repair and Diagnosis › Engine Performance › System › 2AZ-FE Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Accelerator Pedal Rod › Installation

Accelerator Pedal Rod: Installation

  1. INSTALL ACCELERATOR PEDAL ASSEMBLY 
    1. Install the accelerator pedal assembly with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the accelerator pedal assembly connector.
      Fig 1: Locating Accelerator Pedal Assembly Bolts
      G05386945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault