Back-Up Light Assembly: Installation

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL BACK-UP LIGHT BULB
1. Install the back-up light bulb into the light socket.
2. Turn the back-up light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
  
  Fig 1: Installing Back-Up Light Bulb
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BACK-UP LIGHT ASSEMBLY
1. Engage the 2 claws and install the back-up light.
  
  Fig 2: Identifying & Installing 2 Back-Up Light Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Tighten the screw.
3. Connect the connector.
  
  Fig 3: Locating & Installing Back-Up Light Assembly Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002