Customize Parameters

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the intelligent tester or Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus:
1. Intelligent tester - Select - CUSTOMIZE /
2. Techstream - Select: Customize Setting /

Select the setting by referring to the table below.

Intelligent Tester

MAIN BODY

CUSTOMIZE PARAMETERS - MAIN BODY

Display	Default	Contents	Setting
LIGHTING TIME	15 seconds	Changes illumination duration after door closure (It will quickly fade out when turning the ignition switch ON)	7 5/15/30 (seconds)
I/L ON / ACC OFF	ON	Illuminates light when ignition switch turned to ACC (Room light illuminated when interior light switch set to DOOR)	ON/OFF
I/L ON / UNLOCK	ON	Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR)	ON/OFF

Techstream

Main Body

CUSTOMIZE PARAMETERS - MAIN BODY

Display	Default	Contents	Setting
Lighting Time	15 seconds	Changes illumination duration after door closure (It will quickly fade out when turning the ignition switch ON)	7 5/15/30 (seconds)
I/L ON / ACC OFF	ON	Illuminates light when ignition switch turned to ACC (Room light illuminated when interior light switch set to DOOR)	ON/OFF
I/L ON / Unlock	ON	Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR)	ON/OFF