Steering Pad Switch: Removal
WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See
PRECAUTION
).
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
- REMOVE STEERING PAD ASSEMBLY (See REMOVAL )
- REMOVE STEERING PAD SWITCH LH
- Disconnect the connector.
- Remove the screw.
- Disengage the 2 claws and the pin.
- Remove the steering pad switch LH.