FixVault
Home › Scion › 2009 › xB Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect an intelligent tester or Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect an intelligent tester or Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
    5. Erase the DTCs.
About FixVault