FixVault
Home › Scion › 2009 › xB Standard › Repair and Diagnosis › Body & Frame › Door Locks › Wireless Door Lock Control System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time

    NOTE: In the table below, the values listed under Normal Condition are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Turn the tester ON.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. Check the results by referring to the table below.
      1. Main Body: 
        DATA LIST - MAIN BODY

        Tester Display Measurement Item/Range Normal Condition Diagnostic Note
        D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON Driver side door is open
        OFF Driver side door is closed        		 -
        D-Door Lock Pos SW Driver side door lock position switch signal / ON or OFF ON Driver side door is unlocked
        OFF Driver side door is locked        		 -
        Door lock SW-Lock Door manual lock switch signal / ON or OFF ON Door control switch (for front driver door side) is turned to lock position
        OFF Door control switch (for front driver door side) is turned to unlock position        		 -
        Door Lock SW-Unlock Door manual unlock switch signal / ON or OFF ON Door control switch (for front driver door side) is turned to unlock position
        OFF Door control switch (for front driver door side) is turned to lock position        		 -
        Door Key SW-Lock Door key linked lock switch signal / ON or OFF ON Door key cylinder is turned to lock position
        OFF Door key cylinder is turned to unlock position        		 -
        Door Key SW-Unlock Door key linked lock switch signal / ON or OFF ON Door key cylinder is turned to unlock position
        OFF Door key cylinder is turned to lock position        		 -
        D Door Key SW-UL Driver side door key linked unlock switch signal / ON or OFF ON Driver side door key cylinder is turned to unlock position
        OFF Driver side door key cylinder is turned to lock position        		 -
        P Door Courtesy SW Passenger side door courtesy light switch signal / ON or OFF ON Passenger side door is open
        OFF Passenger side door is closed        		 -
        P-Door Lock Pos SW Passenger side door lock position switch signal / ON or OFF ON Passenger side door is open
        OFF Passenger side door is closed        		 -
        RR Door Courtesy SW Rear door RH courtesy light switch signal / ON or OFF ON Rear door RH is open
        OFF Rear door RH is closed        		 -
        RR-Door Lock Pos SW Rear door RH side door lock position switch signal / ON or OFF ON Rear door RH is locked
        OFF Rear door RH is unlocked        		 -
        RL Door Courtesy SW Rear door LH courtesy light switch signal / ON or OFF ON Rear door LH is open
        OFF Rear door LH is closed        		 -
        Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF ON Ignition key is inserted
        OFF Ignition key is not inserted        		 -
        Back Door Open Back door lock position/ PERMIT or PROHIBIT PERMIT Back door is open
        PROHIBIT Back door is closed        		 -
        Key Unlock Warning SW Unlock warning switch / ON or OFF ON Ignition key is inserted
        OFF Ignition key is not inserted        		 -
  2. PERFORM ACTIVE TEST 

    HINT:

    Using the intelligent tester or Techstream to perform Active Tests allows relays, VSVs, actuators and parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Test.

    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON.
    3. Enter the following menus: Body Electrical / Main Body ECU/Active Test.
    4. Perform the ACTIVE TEST by referring to the table below.
      1. Main Body 
        ACTIVE TEST DETAIL - MAIN BODY

        Tester Display Test Part Control Range Diagnostic Note
        Door Lock Operate door lock motor LOCK / UNLOCK LOCK or UNLOCK -
        D-Door Unlock Operate driver door lock motor unlock side ON/OFF ON or OFF -
        Wireless Buzzer Wireless door lock buzzer ON/OFF ON or OFF -
        Vehicle Horn Sounds vehicle horn ON/OFF ON or OFF -
        Hazard Turns FLSH relay ON/OFF ON or OFF -
        Illuminated Entry System Interior light and ignition key cylinder light (Interior light switch is in DOOR position and all doors are closed) ON or OFF -
About FixVault