VSC Off Switch: Inspection

INSPECT VSC OFF SWITCH

Measure the resistance according to the value(s) in the table below.

Standard resistance

STANDARD RESISTANCE SPECIFICATIONS

Tester Connection	Switch Condition	Specified Condition
3 - 6	Released	10 kΩ or higher
3 - 6	Pushed in	Below 25 Ω

If the result is not as specified, replace the VSC off switch.

Check illumination operation.

Standard resistance

STANDARD RESISTANCE SPECIFICATIONS

Tester Connection	Switch Condition	Specified Condition
4 - 5	Battery's positive (+) lead connected to terminal 5 and negative (-) lead to terminal 4	LED illuminates

If the result is not as specified, replace the VSC off switch.

Fig 1: Inspecting VSC OFF Switch