FixVault
Home › Scion › 2009 › xB Standard › Repair and Diagnosis › Engine Performance › System › 2AZ-FE Engine Control System - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection & Installation › Accelerator Pedal Rod › Removal

Accelerator Pedal Rod: Removal

  1. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Disconnect the accelerator pedal assembly connector.
    2. Remove the 2 bolts and accelerator pedal assembly.
      Fig 1: Locating Accelerator Pedal Assembly Bolts
      G05386945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault