FixVault
Home › Scion › 2009 › xB Standard › Repair and Diagnosis › External Pages › Different car › Section 2 (Supplemental Restraint System) › Occupant Classification System › DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect an intelligent tester or Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / BODY SYSTEM / (desired system) / DTC INFO.
      2. Techstream - Select: Body Electrical / (desired system) / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect an intelligent tester or Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / BODY SYSTEM / (desired system) / DTC INFO.
      2. Techstream - Select: Body Electrical / (desired system) / Trouble Codes.
    5. Erase the DTCs.
About FixVault