Data List / Active Test

HINT:

Using an intelligent tester or Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. Turn the ignition switch to off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the tester on.
5. Enter the following menu items: Body Electrical / (desired system) / Data List /
6. According to the display on tester, read the "Data List".
   1. Combination Meter 
      DATA LIST- COMBINATION METER
      
      

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      P-Seatbelt Buckle SW	Front passenger seat belt buckle switch ON or OFF	ON Front passenger seat belt is fastened OFF: Front passenger seat belt is unfastened	-
      D-Seatbelt Warning Buzzer	Driver seat belt warning buzzer: ON or OFF	ON Driver seat belt warning buzzer ON setting OFF: Driver seat belt warning buzzer OFF setting	-
      P-Seatbelt Warning Buzzer	Front passenger seat belt warning buzzer ON or OFF	ON: Front passenger seat belt warning buzzer ON setting OFF: Front passenger seat belt warning buzzer OFF setting	-

      SRS Airbag: 

      DATA LIST - SRS AIRBAG
      
      

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      Passenger Classification	Passenger classification: NG: Data is not determined OFF Vacant Child Child (less than 36 kg (79 37 lb)) is seated AF05: Adult (36 to 54 kg (79 37 to 119 05 lb) is seated AM50: Adult (more than 54 kg (119 05 lb)) is seated Fail. A failure is detected	OFF, Child, AF05 or AM50	-
      Driver Buckle SW	Driver seat belt buckle switch: Unset Driver seat belt is unfastened Set Driver seat belt is fastened NG: Data is not determined	Unset or Set	-
      Passenger Buckle SW	Front passenger seat belt buckle switch Unset Front passenger seat belt is unfastened Set Front passenger seat belt is fastened NG: Data is not determined	Unset or Set	-

      Occupant Detection: 

      DATA LIST - OCCUPANT DETECTION
      
      

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      Passenger Classification	Passenger classification NG Data is not determined OFF: Vacant Child: Child (less than 36 kg (79 37 lb)) is seated AF05: Adult (36 to 54 kg (79 37 to 119 05 lb) is seated AM50 Adult (more than 54 kg (119.05 lb)) is seated Fail A failure is detected	OFF, Child, AF05 or AM50	-
      Passenger Buckle SW	Front passenger seat belt buckle switch. Unset Front passenger seat belt is unfastened Set Front passenger seat belt is fastened NG: Data is not determined	Unset or Set	-

HINT:

Using an intelligent tester or Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Turn the ignition switch to off.
2. Connect the Techstream to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the tester on.
5. Enter the following menus: Body Electrical / Combination Meter / Active Test /
6. According to the display on tester, perform the "Active Test".
   1. Combination Meter: 
      ACTIVE TEST - COMBINATION METER
      
      

      Tester Display	Test Part	Control Range	Diagnostic Note
      Indicat Lamp P-seat Belt	Front passenger seat belt warning light	ON or OFF	Confirm that the vehicle is stopped with the engine idling
      Indicat Lamp D-seat Belt	Driver seat belt warning light	ON or OFF	Confirm that the vehicle is stopped with the engine idling