Shift Lever Assembly: Installation

INSTALL SHIFT LEVER ASSEMBLY
1. Install the shift lever assembly with the 4 bolts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Locating & Installing 4 Shift Lever Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
1. Connect the control cable to the shift lever retainer.
  NOTE:
  - The projecting part of the cable outer should face outside when the shift cable is connected.
  - After installation, make sure that the cable outer lock is projecting from A as shown in the illustration.
    
    Fig 2: Identifying Projecting Part And Lock
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the control select cable to the shift lever assembly.
3. Install the control shift cable to the shift lever assembly.
Fig 3: Locating & Installing Select Cable And Shift Cable
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADJUST TRANSMISSION CONTROL SELECT CABLE (See ADJUSTMENT )
INSTALL INSTRUMENT PANEL FINISH LOWER PANEL (See INSTALLATION )
INSTALL FRONT NO. 2 CONSOLE BOX INSERT (See INSTALLATION )
INSTALL FRONT NO. 1 CONSOLE BOX INSERT (See INSTALLATION )
INSTALL INSTRUMENT CLUSTER FINISH CENTER LOWER PANEL (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (See INSTALLATION )