FixVault
Home › Scion › 2009 › xD Standard › Repair and Diagnosis › Body & Frame › Door Locks › Door Lock › Door Control Receiver › Installation

Door Control Receiver: Installation

  1. INSTALL DOOR CONTROL RECEIVER 
    1. Install the door control receiver with the bolt.

      Torque: 7.4 N*m (75 kgf*cm, 65 in.*lbf) 

    2. Connect the connector.
      3. Fig 1: Locating Door Control Receiver Bolt And Connector
      G05402816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DECK TRIM SIDE BOARD LH  (See INSTALLATION )
  3. INSTALL ROOM LIGHT ASSEMBLY  (See INSTALLATION )
  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See INSTALLATION )
  5. INSTALL REAR SEAT ASSEMBLY LH  (See INSTALLATION )
  6. INSTALL NO. 1 SEAT LEG COVER  (See INSTALLATION )
  7. INSTALL NO. 2 SEAT LEG COVER  (See INSTALLATION )
  8. INSTALL REAR DECK TRIM COVER  (See INSTALLATION )
  9. INSTALL DECK BOARD ASSEMBLY  (See INSTALLATION )
  10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH 

    HINT:

    Use the same procedure as for the RH side (See INSTALLATION ).

  11. INSTALL REAR DOOR SCUFF PLATE LH 

    HINT:

    Use the same procedure as for the RH side (See INSTALLATION ).

About FixVault