FixVault
Home › Scion › 2009 › xD Standard › Repair and Diagnosis › Drivelines & Axles › Wheel Hubs › Axle › Front Axle Hub Bolt › Replacement

Front Axle Hub Bolt: Replacement

  1. REMOVE FRONT WHEEL 
  2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY  (See REMOVAL  )
  3. REMOVE FRONT DISC 
  4. REMOVE FRONT AXLE HUB BOLT 
    1. Using SST and a screwdriver or the equivalent to hold the axle hub, remove the hub bolt.

      SST 09628-10011 

      Fig 1: Removing Hub Bolt
      G05400827Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL FRONT AXLE HUB BOLT 
    1. Install the washer and the nut onto a new hub bolt, as shown in the illustration.
      2. Fig 2: Installing Hub Bolt
      G05400828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver or the equivalent to hold the axle hub, install the hub bolt by tightening the nut.
  6. INSTALL FRONT DISC 
  7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY  (See INSTALLATION  )
  8. INSTALL FRONT WHEEL 

    Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf) 

About FixVault