Manual Transaxle Assembly: Installation: Installation

INSTALL MANUAL TRANSAXLE ASSEMBLY

Fig 1: Locating Manual Transaxle Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Align the input shaft with the clutch disc and install the manual transaxle onto the engine.
2. Install the 7 bolts.
  Torque: 33 N*m ( 336 kgf*cm, 24 in.*lbf)
INSTALL ENGINE MOUNTING BRACKET LH

Fig 2: Locating Engine Mounting Bracket LH Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the engine mounting bracket LH with the 6 bolts.
  Torque: 64 N*m ( 653 kgf*cm, 47 in.*lbf)
INSTALL TRANSMISSION CONTROL CABLE BRACKET

Fig 3: Locating Control Cable Bracket
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the transmission control cable bracket with the 2 bolts.
  Torque: 25 N*m ( 255 kgf*cm, 18 in.*lbf)
INSTALL STARTER ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL FLYWHEEL HOUSING SIDE COVER . Refer to INSTALLATION - Step 2
INSTALL ENGINE MOVING CONTROL BRACKET

Fig 4: Locating Engine Moving Control Bracket Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the engine moving control bracket with the 4 bolts.
  Torque: 64 N*m ( 653 kgf*cm, 47 in.*lbf)
INSTALL ENGINE AND TRANSAXLE
1. Install the engine and transaxle. Refer to INSTALLATION .