Fuel Pressure Pulsation Damper: Installation: Installation

INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
1. Apply a light coat on gasoline or spindle oil to a new O-ring on the fuel pressure pulsation damper.
  
  Fig 1: Identifying Fuel Pressure Pulsation Damper O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the fuel pressure pulsation damper with the 2 bolts.
  
  Fig 2: Identifying Fuel Pressure Pulsation Damper Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  NOTE:
  Make sure that the O-ring is not cracked or jammed when installing.
CONNECT FUEL MAIN TUBE Refer to 4
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE . Refer to INSTALLATION - Step 2
INSPECT FOR FUEL LEAK
Refer to PRECAUTION
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 5