FixVault
Home › Scion › 2011 › xB Standard › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Camshaft Position Sensor › Removal › Removal

Camshaft Position Sensor: Removal: Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  Refer to 2
  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE  Refer to 3
  3. REMOVE CAMSHAFT POSITION SENSOR 
    Fig 1: Identifying Camshaft Position Sensor Connector And Bolt
    GTY160931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
About FixVault