FixVault
Home › Scion › 2011 › xD Standard › Repair and Diagnosis (Single Page) › Engine Performance › Remove, Overhaul & Install › Engine Control System (Service Information) › Mass Air Flow Meter › Installation › Installation

Mass Air Flow Meter: Installation: Installation

  1. INSTALL MASS AIR FLOW METER 
    1. Install the mass air flow meter with the 2 screws.
      Fig 1: Identifying Mass Air Flow Meter Screws And Mass Air Flow Meter Connector
      GTY161149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Make sure that the O-ring is not cracked or jammed when installing.

    2. Connect the mass air flow meter connector.
About FixVault