FixVault
Home › Scion › 2012 › iQ › Repair and Diagnosis › Engine Performance › Testing & Diagnosis › Engine Control System (Service Information) › Accelerator Pedal › Removal › Removal

Accelerator Pedal: Removal: Removal

  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    1. Disconnect the connector of the accelerator pedal sensor assembly.
      Fig 1: Identifying Accelerator Pedal Sensor Connector And Bolts
      GTY346343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and the accelerator pedal sensor assembly.
      NOTE:

      If a component has been dropped or subjected to a strong impact, replace it.

About FixVault