FixVault
Home › Scion › 2012 › tC Standard Trans › Repair and Diagnosis (Single Page) › Engine Performance › Testing & Diagnosis › Engine Control System (Service Information) › Knock Sensor › Inspection › Inspection

Knock Sensor: Inspection: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 120 to 280 kΩ

      If the result is not as specified, replace the knock sensor.

About FixVault