FixVault
Home › Scion › 2012 › xD Standard Trans › Repair and Diagnosis › Brakes › Anti-Lock Brakes › Brake Control System (Service Information) › Steering Angle Sensor › Installation › Installation

Steering Angle Sensor: Installation: Installation

WARNING:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Refer to PRECAUTION .

  1. INSTALL STEERING ANGLE SENSOR 
    1. Engage the 6 claws and insert the 2 pins into the holes to install the steering angle sensor onto the spiral cable.
      Fig 1: Identifying Steering Angle Sensor Claws And Pins
      GTY164772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SPIRAL CABLE  . Refer to INSTALLATION - Step 2
  3. INSTALL STEERING COLUMN UPPER COVER  . Refer to INSTALLATION - Step 21
  4. INSTALL STEERING COLUMN LOWER COVER  . Refer to INSTALLATION - Step 22
  5. ADJUST SPIRAL CABLE  . Refer to INSTALLATION - Step 5
  6. INSTALL STEERING WHEEL ASSEMBLY  . Refer to INSTALLATION - Step 23
  7. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  8. TURN FRONT WHEELS FACING STRAIGHT AHEAD 
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  10. INSPECT SRS WARNING LIGHT 

    Refer to DIAGNOSIS SYSTEM

About FixVault