FixVault
Home › Scion › 2013 › iQ Base › Repair and Diagnosis (Single Page) › Body & Frame › Windows › Power Window Control System (Diagnostics Introduction) (Except Electric) › Power Window Control System › DTC Check / Clear › DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body / (desired system) / Trouble Codes.
    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body / (desired system) / Trouble Codes.
    5. Clear the DTCs.
About FixVault