FixVault
Home › Scion › 2013 › tC Automatic Trans › Repair and Diagnosis › Electrical › Body Electrical › Power Distribution (Service Information) › Power Source Control Ecu › Removal › Removal

Power Source Control Ecu: Removal: Removal

  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  . Refer to REMOVAL - Step 9
  2. REMOVE LOWER INSTRUMENT COVER RH  . Refer to REMOVAL - Step 10
  3. REMOVE ECU INTEGRATION BOX RH 
    1. Disconnect the 4 connectors.
      Fig 1: ECU Integration Box RH
      GTY313307Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt, nut and ECU integration box RH.
  4. REMOVE POWER SOURCE CONTROL ECU 
    1. Detach the 2 claws and remove the power source control ECU.
      Fig 2: Identifying Power Source Control ECU
      GTY313509Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault