Combination Meter: Installation: Installation

INSTALL COMBINATION METER ASSEMBLY

Fig 1: Identifying Combination Meter Assembly Connectors, Screws & Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Engage the 2 clips and install the combination meter.
2. Install the 2 screws and connect the 2 connectors.
INSTALL INSTRUMENT CLUSTER FINISH PANEL

Fig 2: Identifying Cluster Finish Panel Claws & Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Engage the 8 claws and the 5 clips and install the cluster finish panel.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)