TPMS Reminder Reset - Procedure 02

The TPMS must be restarted when you have adjusted the tire inflation pressure to a new level (e.g. because of different load or driving conditions). The TPMS sets new reference values for each tire. The TPMS is then recalibrated to the current tire inflation pressures.

When you restart the tire pressure monitor, all existing warning messages are deleted and the warning lamps go out. The monitor uses the currently set tire pressures as the reference values for monitoring. In most cases, the tire pressure monitor will automatically detect the new reference values after you have changed the tire pressure. However, you can also define reference values manually as described here.

1. Press the UP/DOWN ARROW buttons on the steering wheel to select the SETTINGS menu and press OK on the steering wheel to confirm.
2. Press the UP/DOWN ARROW buttons to select the TIRE PRESSURE MONITOR submenu and confirm with OK. The "Tire Pressure Monitor Use Current Pressures As New Reference Values?" message appears in the display.
3. Press the UP/DOWN ARROW button to select YES, and press OK to confirm.
4. The "Tire Pressure Monitor Restarted" message appears in the display. Press OK to confirm.
   NOTE: If the "Tire Pressure Monitor Restarted" message does not appear after approximately 5 seconds, the restart was not successful. If this occurs, repeat the restart.
5. After a short while, the message is also hidden without pressing the OK button. After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.