FixVault
Home › Subaru › 1985 › XT GL › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment Specifications & Procedures › Riding Height Specifications › Toe-In (XT)

Toe-In (XT)

  1. Loosen outer mounting bolts. See Fig 1 . When toe-in (or side slip) is excessive, tighten outer arm mounting bolts while pulling end of spindle towards rear of vehicle. This would be in direction of arrow. See Fig 2 .
  2. When toe-out (or side slip) is excessive, tighten outer arm mounting bolts while pushing end of spindle toward front of vehicle (in opposite direction of arrow. See Fig 2 . Adjust toe-in within specifications by repeating steps for both right and left wheels.
Fig 1: Toe-In Adjustment (XT)
G50864
Fig 2: Toe-Out Adjustment (XT)
G50865
About FixVault