With A "NO TROUBLE" Condition

BASIC OPERATION OF SELF-DIAGNOSTIC SYSTEM - NO TROUBLE MENU

Engine & Connector Conditions

CHECK ENGINE Light should Be:

O2 Monitor Light Should Read:

U-Check Mode, Engine Off, Ignition Switch On, Read Memory Connector Disconnected, Test Mode Connector Disconnected

Vehicle Specification Code Displayed

U-Check Mode, Engine On, Read Memory Connector Connected, Test Mode Connector Disconnected

Off

O2 Monitor

Read Memory, Engine Off, Ignition Switch On, Read Memory Connector Connected, Test Mode Connector Disconnected

Blinking

Vehicle Specification Code Displayed

Read Memory, Engine On, Read Memory Connector Connected, Test Mode Connector Disconnected

Blinking

O2 Monitor

D-Check, Engine Off, Ignition Switch On, Read Memory Connector Disconnected, Test Mode Connector Connected

Vehicle Specifications Code Displayed

D-Check, Engine On, Read Memory Connector Disconnected, Test Mode Connector Connected

⁽¹⁾ Vehicle Specs Code Displayed

Vehicle Specs Code Displayed

Clear Memory, Engine Off, Ignition Switch On, Read Memory Connector Connected, Test Mode Connector Connected

Vehicle Specifications Code Displayed

Clear Memory, Engine On, Read Memory Connector Connected, Test Mode Connector Connected

⁽¹⁾ Vehicle Specs Code Displayed

Vehicle Specs Code Displayed

⁽¹⁾	When the engine operates at a speed greater than 2000 RPM for more than 40 seconds, the check engine light blinks. However, when all check items check out "OK", even before the 40 seconds is reached, the check engine light blinks.