FixVault
Home › Subaru › 1991 › Legacy LSi, AWD › Repair and Diagnosis › External Pages › Different car › Section 1 (Engine Controls - Basic Testing) › Ignition Checks › Ignition Coil Resistance Check › All Other Models

All Other Models

WARNING: This page is about a different car, the 1990 Subaru XT6, 1990 Subaru XT, 1990 Subaru Loyale, and 1990 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. There are 2 2-wire connectors at ignition coil; disconnect the round connector. Check primary resistance between terminals. If resistance is not .81-.99 ohm, replace coil.
  2. To check secondary resistance, connect ohmmeter between coil secondary tower and White/Black wire terminal of 2-wire connector. If resistance is not 8500-11,000 ohms, replace coil.
About FixVault